Appendix B Catalyst 2350 Debug Command; Debug Cluster - Cisco WS-C2350-48TD-S Command Reference Manual

debug cluster

debug cluster
Use the debug cluster privileged EXEC command to enable debugging of cluster-specific events. Use
the no form of this command to disable debugging.
Syntax Description discovery
events
extended
http
ip [packet]
members
nat
neighbors
platform
snmp
vqpxy
Note Though visible in the command-line help, the hsrp keyword is not supported.
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(46)EY
Usage Guidelines
This command is available only on the cluster command switch.
The undebug cluster command is the same as the no debug cluster command.
Catalyst 2350 Switch Command Reference
B-2
debug cluster {discovery | events | extended | http | ip [packet] | members | nat | neighbors |
platform | snmp | vqpxy}
no debug cluster {discovery | events | extended | http | ip [packet] | members | nat | neighbors |
platform | snmp | vqpxy}
Display cluster discovery debug messages.
Display cluster event debug messages.
Display extended discovery debug messages.
Display Hypertext Transfer Protocol (HTTP) debug messages.
Display IP or transport packet debug messages.
Display cluster member debug messages.
Display Network Address Translation (NAT) debug messages.
Display cluster neighbor debug messages.
Display platform-specific cluster debug messages.
Display Simple Network Management Protocol (SNMP) debug messages.
Display VLAN Query Protocol (VQP) proxy debug messages.
Modification
This command was introduced.
Appendix B Catalyst 2350 Debug Commands
OL-19055-01