Appendix B Catalyst 3550 Switch Debug Command; Debug Acltcam - Cisco Catalyst 3550 Command Reference Manual

debug acltcam

debug acltcam
Use the debug acltcam privileged EXEC command to enable debugging of the actions of the quality of
service/access control list (QoS/ACL) ternary content addressable memory (TCAM) manager software
module. This module controls the allocation and updating of entries in the parts of the TCAM used for
input security ACLs, output security ACLs, and QoS ACLs. Use the no form of this command to disable
debugging.
Syntax Description verbose
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.1(4)EA1
Usage Guidelines
The undebug acltcam command is the same as the no debug acltcam command.
Related Commands Command
show debugging
Catalyst 3550 Multilayer Switch Command Reference
B-2
debug acltcam [verbose]
no debug acltcam [verbose]
(Optional) Display detailed debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
Appendix B Catalyst 3550 Switch Debug Commands
OL-8566-02