Door Mirror Actuator Replacement - Acura NSX 1997 Service Manual

Main Menu
Power Mirrors

Door Mirror Actuator Replacement

1. Remove the mirror and actuator assembly from the
housing (see section
2. Place the mirror on a flat, padded surface. Pull up
on the spring-loaded lug, and remove the roll pin.
ROLL PIN
3. Pull the actuator away from the mirror. If the actua-
tor shafts do not come off with the actuator, pry
them out of their sockets.
4. Discard the actuator and shafts.
Table of Contents
20).
LUG
ACTUATOR
MIRROR
5. Set the new actuator on the back of the mirror with
the lug protruding through the middle. Pull up on
the lug, and install the roll pin removed in step 3.
6. Press the actuator shafts into the sockets on the
mirror.
7. Install the mirror and actuator assembly in the
housing (see section 20).
8. Test the mirror's operation.
PIN
(Align with slot)
SLOT