HP 8712ET User Manual page 417

Table 9-6 Test Port Input (continued)
System Dynamic Range
HP 8714ET:
50 Ω:
With Attenuator Option 1E1
Narrowband
Broadband (Internal)
Without Attenuator Option 1E1
Narrowband
Broadband (Internal)
75 Ω:
With Attenuator Option 1E1
Narrowband
Broadband (Internal)
Without Attenuator Option 1E1
Narrowband
Broadband (Internal)
a. The System Dynamic Range is calculated as the difference between the receiver noise floor
and the minimum of either the source maximum output (maximum power setting minus out-
put power level accuracy) or the receiver maximum input. System Dynamic Range applies to
transmission measurements only, since reflection measurements are limited by directivity.
The System Dynamic Range for HP 8714 ET/ES 75 W analyzers is not a specification for fre-
quencies >2 GHz; it is a characteristic. For the HP 8712ES/8714ES, external broadband detec-
tors will provide more dynamic range than the internal broadband detectors.
b. Option 1E1 adds a 60 dB step attenuator to the HP 8712ET/8714ET.
HP 8712ET/ES and HP 8714ET/ES Test Port Input
Description
a
(continued)
b
:
b
:
ET User's Guide
Spec.
(in dB)
System Bandwidths:
Fine Fine
(15 Hz) (15 Hz)
112 120
57 64
114 121
59 65
107 115
50 58
110 116
53 59
Specifications
Typical
(in dB)
Med Wide Wide
(4000 Hz) (6500 Hz)
95 57
57 41
96 58
58 42
90 52
51 36
91 53
52 37
9-23