HP 8712ET User Manual page 276

Rf network analyzers

Hide thumbs Also See for HP 8712ET:

Table of Contents

PARALLEL PORT

Front/Rear Panel

This rear panel connector is used with peripherals with parallel interface

such as printers and plotters. The pin-out is standard IBM PC

compatible Centronics interface, using a female DB-25 connector, as

7-4. All pins are ESD protected; data and strobe pins

have 2200 pF capacitors; voltage levels are TTL compatible; output pins

can source 15 mA and sink 24 mA. See

for information on using this port with a printer or plotter.

Parallel Port Pin-outs

"Conﬁgure the Hardcopy Port" on

ET User's Guide