HP 8712ET User Manual page 297

A
A/R
Abort
Abort
Cal Check
Abort Kit
A
Softkey in the narrowband internal menu. Selects the tuned receiver
measurement of input A.
See "Measuring Devices with Your Network Analyzer" on page 3-3
more information on input A.
Access keys:
MEAS 1
Narrowband Internal
Softkey in the narrowband internal menu. Selects the tuned receiver
reflection measurement A/R.
See "Measuring Devices with Your Network Analyzer" on page 3-3
more information on measuring A/R.
Access keys:
MEAS 1
Narrowband Internal
Softkey in the
HARDCOPY
network analyzer to the hardcopy device.
NOTE
Softkey in the do cal check menu. Stops the current cal check
procedure and returns to the cal check menu.
See Chapter 6 for more information on using cal check.
Access keys:
CAL
Softkey in the modify kit menu. Stops the current calibration kit
modification procedure and returns to the cal kit menu.
Access Keys:
CAL
Modify (connector type)
ET User's Guide
or , Detection Options
MEAS 2
or , Detection Options
MEAS 2
menu. Stops sending data from the
Hardcopy devices with large buffers may continue
to operate for quite a while after this command.
To stop such devices immediately, turn off power
to the hardcopy device.
Cal Check Do Cal Check
More Cal Cal Kit
Hardkey/Softkey Reference
for
for
8-5
A