HP 8712ET User Manual page 194

Defining a Plotter
Using Instrument Functions
Connecting and Configuring Printers and Plotters
Make the following selections in the analyzer menus:
1. Press Restore Defaults
plotter. The defaults are:
Monochrome/Color
Auto Feed
Color Plotter Pen Numbers
2. Select the type of plotter you have: either monochrome or color.
3. Use Set Pen Numbers
traces, memory traces, graticule, and graphics. Press
when done selecting pens.
4. If you do not want auto feed active, press
4-76
to restore the default parameters for a
Parameter
to select the pen number(s) for the data
Default
Monochrome
ON
Trace 1 = Pen 1
Trace 2 = Pen 2
Memory 1 = Pen3
Memory 2 = Pen 4
Graticule = Pen 5
Graphics = Pen 6
Prior Menu
Auto Feed OFF
ET User's Guide
.