HP 8712ET User Manual page 298

Active
Marker Off
Add Kit
Description
Add Limit
Add Login User
Add Max Line
Hardkey/Softkey Reference
A
Softkey in the marker menu that turns off the active marker and
makes the lowest numbered marker (if any) the active marker.
See "Using Markers" on page 4-3
and for more information on using markers.
Access Keys:
MARKER
Softkey in the mod kit save/recall menu that allows you to enter your
own description of a user-defined calibration kit.To enter the
description, it is fastest and easiest to use a keyboard connected to the
analyzer DIN KEYBOARD connector. If you don't have a keyboard, you
can use the analyzer
Select Char
the key to select and enter characters from the top of the
analyzer's display. Press
See Chapter 6, "Calibrating for Increased Measurement Accuracy,"
more information.
Access Keys: CAL
Mod Kit SaveRecall
Softkey in the limit menu. Displays the menu to add limit lines or
points to the limit table.
See "Using Limit Testing" on page 4-28
using limit lines.
Access Keys: DISPLAY
Softkey in the users setup menu. Displays dialog boxes for entering
login user/password pairs to the access list of your analyzer.
See The LAN Interface User's Guide Supplement for more information.
Access Keys:
SYSTEM OPTIONS
Softkey in the add limit menu. Displays the menu to add a maximum
limit line.
See "Using Limit Testing" on page 4-28
using limit lines.
Access Keys:
DISPLAY
8-6
for an explanation of "active marker,"
More Markers
keys or the front panel knob and
Enter
when done.
More Cal Cal Kit Modify (connector type)
for detailed information on
Limit Menu
LAN
for detailed information on
Limit Menu
Login User Setup
Add Limit
ET User's Guide
for