HP 8712ET User Manual page 375

Socket
Port No.
Softkey
Auto-Step
Source Match
Space
Span
Split Disp
FULL split
Softkey in the SCPI sock. setup menu. Allows you to enter the port
number for a socket connection to the analyzer for SCPI socket
programming. The default port number is 5025.
See The LAN Interface User's Guide Supplement for more information.
Access Keys:
SYSTEM OPTIONS
Softkey in the user TTL config menu. Displays a pop-up message with
a description of softkey sequencing and softkeys to enable or disable
the auto-step function.
See "Measurement Setup and Control with Fast Recall" in the
Automating Measurements User's Guide Supplement for more
information.
Access Keys:
SYSTEM OPTIONS
User TTL Config
Softkey in the cal check menu. One of the corrected measurement
uncertainties that can be viewed after performing a cal check.
Refer to Chapter 6 for more information on using cal check.
Access Keys:
CAL
Softkey in the character entry menu. Adds a blank space to a title or
filename.
Softkey in the
FREQ
Selects the frequency span of the source. When selected, it changes the
frequency annotation from start/stop to center/span.
See "Entering Measurement Parameters" on page 2-4
information.
Softkey in the more display menu. Toggles the display mode between
split (measurement channel 1 on top, measurement channel 2 on the
bottom) and full (both measurement channels on full screen).
See "Entering Measurement Parameters" on page 2-4
information.
Access Keys:
DISPLAY
ET User's Guide
LAN SCPI Sock. Setup
System Config
Cal Check View Cal Check
menu. Used in conjunction with
More Display
Hardkey/Softkey Reference
Center .
for more
for more
8-83
S