HP 8712ET User Manual page 320

End Limit
End Line #
Enhanced
Response
Enter Line 1
Enter Line 2
Ethernet
Address
Hardkey/Softkey Reference
E
Softkey in the max line and min line menus. Sets the end (or stop)
amplitude (height) of a limit line.
See "Using Limit Testing" on page 4-28
lines.
Access Keys:
DISPLAY
Add Max Line or
Softkey in the secure menu that is used with the IBASIC feature of the
instrument.
See the HP Instrument BASIC User's Handbook for information on the
secure function.
Access Keys:
SYSTEM OPTIONS
Softkey in the
CAL
key to perform a user-defined enhanced response calibration. Restores
a previous enhanced response calibration if current analyzer
parameters are compatible with those used during the previous
calibration. Corrects for frequency response and source match errors.
See "To Perform a Transmission Calibration" on page 6-12
information.
Softkey inthe title and clock menu. Displays the menu to edit the
screen title on line 1 of the display. Maximum number of characters is
36.
Access Keys: DISPLAY
Softkey in the title and clock menu. Displays the menu to edit the
screen title on line 2 of the display. Maximum number of characters is
36.
Access Keys:
DISPLAY
Softkey in the LAN port setup menu. Displays the Ethernet address,
which is a 48-bit number assigned at the factory to be used to identify a
machine on the network. The Ethernet address cannot be changed.
See The LAN Interface User's Guide Supplement for more information.
Access Keys:
SYSTEM OPTIONS
8-28
for more information on limit
Limit Menu
Add Min Line
IBASIC
menu when measuring transmission. Select this
More Display Title and Clock
More Display Title and Clock
LAN
Add Limit ,
Utilities Secure
for more
LAN Port Setup
ET User's Guide