HP 8712ET User Manual page 369

Save Meas 2
Save Program
SAVE RECALL
Save State
SCALE
Scale/Div
Softkey in the save ASCII menu. Selects measurement channel 2 data
to be saved as ASCII data. This data can be imported into a
spreadsheet or word processing program.
See "Saving and Recalling Measurement Results" on page 4-55
more information.
Access Keys:
SAVE RECALL
Softkey in the programs menu. Saves the current program to internal
RAM or 3.5" disk.
See the HP Instrument BASIC User's Handbook Supplement for more
information.
Access Keys:
SAVE RECALL
Hardkey in the SYSTEM area of the front panel. Displays menus to:
save, title, define, and recall states and programs; rename, delete, and
copy files; select, configure, and format disks.
See "Saving and Recalling Measurement Results" on page 4-55
more information.
Softkey in the SAVE RECALL
RAM or 3.5" disk, automatically naming the file "STATE#."
See "Saving and Recalling Measurement Results" on page 4-55
more information.
Hardkey in the CONFIGURE area of the front panel. Allows changing
of scale per division, reference level, and reference position for
optimum viewing of measurements. Also accesses the reference
tracking, phase offset, and electrical delay functions.
See "Entering Measurement Parameters" on page 2-4
Reference Tracking" on page 4-42
Softkey in the
SCALE
graticule. For example, if the scale/div is 10 dB, each graticule line is
10 dB higher than the one below.
ET User's Guide
Define Save
Programs
menu. Saves information to internal
for more information.
menu. Sets the value of vertical divisions of
Hardkey/Softkey Reference
for
Save ASCII
for
for
and "Using
S
8-77