HP 8712ET User Manual page 374

Show Clock
on Line 1
Show Clock
on Line 2
SICL LAN
Setup
Single
Smith Chart
Smith Chart Z0
Hardkey/Softkey Reference
S
Softkey in the title and clock menu. Displays the clock on the
uppermost line of the title area when
ON.
Access Keys:
DISPLAY
Softkey in the title and clock menu. Displays the clock on the
uppermost line of the title area when
ON.
Access Keys: DISPLAY
Softkey in the LAN menu. Displays the menu to setup the HP-IB
device address, HP-IB logical unit number, and HP-IB name for SICL
LAN control of the analyzer.
See The LAN Interface User's Guide Supplement for more information.
Access Keys:
SYSTEM OPTIONS
Softkey in the trigger menu. Immediately stops the current sweep,
takes one complete sweep, and holds until retriggered by pressing
Single again, or
Access Keys:
MENU
Softkey in the format menu. A reflection measurement display format
that maps the complex reflection coefficient (rho) to the DUT's
impedance.
See "Measuring Impedance using the Smith Chart" on page 3-57
more information.
Sets the characteristic impedance used by the analyzer in calculating
measured impedance with Smith chart markers and conversion
parameters. Characteristic impedance must be set correctly before
calibrating for a Smith chart measurement. Acceptable values are
1 ohm to 1000 ohms.
Access Keys:
CAL
8-82
Title+Clk ON off
More Display Title and Clock
Title+Clk ON off
More Display Title and Clock
LAN SICL LAN Setup
Continuous .
Trigger
More Cal
is toggled
is toggled
for
ET User's Guide