HP 8712ET User Manual page 311

CRT Adjust
Current Size
Custom Colors
CW
Softkey in the system configuration menu. Displays the menu to set
the external CRT position and timing parameters for best image.
These settings are not affected by presetting the analyzer.
NOTE
See "Using an External VGA Monitor" on page 4-86
information.
Access Keys: SYSTEM OPTIONS
Softkey in the configure VOL_RAM disk menu. Displays a message box
that shows the total memory available and the current memory
allocation for the internal volatile RAM disk.
Access Keys:
SAVE RECALL
Configure VOL_RAM
Softkey in the color options menu. Accesses the menu that allows you
to customize the colors on your external monitor, or to customize the
greyscale on the analyzer's internal display.
See "Using an External VGA Monitor" on page 4-86
information.
Access Keys: DISPLAY
Softkey in the
FREQ
frequency) source operation.
ET User's Guide
These adjustments also affect the internal CRT of
the analyzer.
System Config
Select Disk
More Display Color Options
menu. Selects CW (continuous wave, single
Hardkey/Softkey Reference
for more
for more
8-19
C