HP 8712ET User Manual page 362

Recall Line
Recall Program
Recall State
Reference Level
Reference
Position
Reference
Tracking
Refl Port
Extension
Hardkey/Softkey Reference
R
Softkey in the IBASIC edit menu.
Access Keys:
SYSTEM OPTIONS
Softkey in the programs menu. Recalls to the network analyzer a
program from internal memory, internal disk, or external disk.
See the HP Instrument BASIC User's Handbook Supplement for more
information.
Access Keys:
SAVE RECALL
Softkey in the
SAVE RECALL
(not plot files) from internal memory or a floppy disk.
See "Saving and Recalling Measurement Results" on page 4-55
more information.
Softkey in the
SCALE
reference value is noted on the screen as "Ref".
Softkey in the
SCALE
from the top of the graticule (10) to the bottom (0) or in between.
Default position is middle (5).
See Figure 2-3, "Reference Positions," on page
Softkey in the
SCALE
frequency or the peak point of the measurement trace by scaling the
trace such that the point of interest always falls on the display
reference line.
See "Using Reference Tracking" on page 4-42
Softkey in the more cal menu. Allows compensation for phase shift due
to an extended measurement reference plane on the REFLECTION RF
OUT port.
See "Port Extensions" on page 5-17
Access Keys:
CAL
Port Ext's on OFF
8-70
IBASIC
Programs
menu. Recalls instrument state files
menu. Sets the value of the reference line. The
menu. Sets the position of the reference line
menu. Allows you to track either a certain
for more information.
More Cal Port Extensions
Edit
for
2-3.
for more information.
ET User's Guide