HP 8712ET User Manual page 198

Figure 4-28
NOTE
NOTE
Using Instrument Functions
Printing and Plotting Measurement Results
List Trace Values
Trace Values
Figure 4-28 shows the trace values for a transmission measurement in
log mag format. Trace values for polar format will be frequency,
magnitude, and phase; while trace values for Smith chart format will be
frequency, resistance, and complex impedance.
You may notice a decrease in measurement speed when the network
analyzer is outputting to a printer or plotter that doesn't have a built-in
buffer. For the fastest possible hardcopy dump to such devices, press
Trigger
MENU
the following table for some typical print times.
4-80
outputs only the marker table. (This selection
allows printing of the limit-line table as well.)
Hold before beginning the print or plot. Refer to
ET User's Guide