HP 8712ET User Manual page 316

Delete Limit
Delete Line
Delete
Login User
Delta Mkr
on OFF
Detection
Options
Diagnostic
Utilities
Directivity
Hardkey/Softkey Reference
D
Softkey in the limit menu. Displays the menu to delete one segment (or
point) of a limit line or all limits.
See "Using Limit Testing" on page 4-28
lines.
Access Keys:
DISPLAY
Softkey in the edit menu of IBASIC. Allows deletion of one line of code
at a time.
Access Keys:
SYSTEM OPTIONS
Softkey in the users setup menu. Displays dialog boxes for deleting
login user/password pairs from the access list of your analyzer.
See The LAN Interface User's Guide Supplement for more information.
Access Keys: SYSTEM OPTIONS
Softkey in the marker functions menu. Toggle to ON if you want to
make the active marker the delta marker or reference point.
See "To Use Delta (D) Marker Mode" on page 4-24
information.
Access Keys: MARKER
Softkey in the
MEAS 1
type: narrowband or broadband internal, broadband external or aux
input.
Softkey in the LAN port setup menu. Displays the menu to set the IP
address to ping and to perform ping.
See The LAN Interface User's Guide Supplement for more information.
Access Keys: SYSTEM OPTIONS
Softkey in the cal check menu. One of the corrected measurement
uncertainties that can be viewed after performing a cal check.
Refer to Chapter 6 for more information on using cal check.
Access Keys:
CAL
8-24
for more information on limit
Limit Menu
IBASIC
LAN
Marker Functions
and menus. Selects measurement
MEAS 2
LAN
Cal Check View Cal Check
Edit
Login User Setup
for more
LAN Port Setup
ET User's Guide