HP 8712ET User Manual page 379

Rf network analyzers
Hide thumbs Also See for HP 8712ET:
Table of Contents

Advertisement

Sweep Time
Sweep Time
AUTO man
Switching
Test Set
SWR
Sync Green
on OFF
System
Bandwidth
Softkey in the
SWEEP
possible to three days (259.2 ks); overrides auto sweep time. Fastest
possible sweeptime varies, and depends on other analyzer settings.
See
Chapter 5
for more information on sweep time.
Softkey in the
SWEEP
fast as possible (automatic) or at the sweep time of your choice
(manual).
See
Chapter 5
for more information on sweep time.
Softkey in the system config menu. Configures the analyzer for use
with a multiport test set.
Refer to the multiport test set User's and Service Guide for more
information.
Access Keys:
SYSTEM OPTIONS
Softkey in the
FORMAT
(standing wave ratio).
Softkey in the CRT adjust menu. Toggle to ON for use with a
sync-on-green external monitor. The default setting is toggled to OFF.
Access Keys:
SYSTEM OPTIONS
Softkey in the
AVG
the IF filters in the receiver section of the network analyzer.
See
"To Reduce the Receiver Noise Floor" on page 5-10
following table for more information on system bandwidth.
ET User's Guide
menu. Sets the sweep time from fastest
menu. Sets the network analyzer to sweep as
System Config
menu. Displays the data formatted as SWR
System Config
menu. Displays the menu to set the bandwidth of
Hardkey/Softkey Reference
CRT Adjust
and the
8-87
S

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hp 8714et

Table of Contents