HP 8712ET User Manual page 356

Parameters
Received
Password
Perform Ping
Perform Secure
Phase
Phase Offset
Hardkey/Softkey Reference
P
P
Softkey in the BOOTP setup menu. Displays the BOOTP parameters
received from the BOOTP host: host address, IP address, gateway IP
address, subnet mask, and file path.
See The LAN Interface User's Guide Supplement for more information.
Access Keys:
SYSTEM OPTIONS
Softkey in the add login user menu and delete login user menu.
Displays a dialog box for entering a password to be added or deleted on
the access list of your analyzer.
See The LAN Interface User's Guide Supplement for more information.
Access Keys:
SYSTEM OPTIONS
Add Login User
Softkey in the diagnostic utilities menu. Allows you to run the ping
utility to determine the status of the connections between devices and
a network.
See The LAN Interface User's Guide Supplement for more information.
Access Keys:
SYSTEM OPTIONS
Diagnostic Utilities
Softkey in the secure menu. Use with caution: secured program lines
can't be listed, seen, or edited.
See the HP Instrument BASIC User's Handbook Supplement for more
information.
Access Keys:
SYSTEM OPTIONS
Softkey in the FORMAT
phase portion of the data, measured in degrees. This format displays
the phase shift versus frequency.
Softkey in the
SCALE
constant with frequency (rather than linear).
8-64
LAN
LAN
or Delete Login User
LAN
IBASIC
menu. Displays a Cartesian format of the
menu. Adds or subtracts a phase offset that is
BOOTP Setup
Login User Setup
LAN Port Setup
Utilities Secure
ET User's Guide
,