5.2, Set Asc Limits - Polaris DP-20 User Manual

3X.5.2, Set ASC Limits
This procedure is used to set the ASC Limits. These limits are configurable
for each sensor mode. Use the "ASC CONTROL" menu to enable the ASC
function.
1. Press the SETUP key to enter the Setup
2. Use the ARROW keys to scroll until CUSTOM
3. Press the ENTER key to enter the Custom
4. Use the ARROW keys to scroll until SET ASC
5. If necessary, press the SENSOR key to select
6. Press the ENTER key to enter the SET ASC
7. Use the ARROW keys to adjust the negative
8. Press the ENTER key to switch to the positive
9. If the ENTER key was pressed in step 8, use
06-05-2007
DP-20 WEB GUIDE CONTROLLER USER MANUAL
Menus. The SELECT MENU screen will be
displayed.
is displayed on line 4.
Menus. The ASC CONTROL menu will be
displayed.
LIMITS is displayed on line 3. The current ASC
Limit values are displayed on line 4.
the desired sensor mode.
LIMITS menu. The negative ASC Limit value
will begin flashing.
ASC limit value, if desired. Press both ARROW
keys simultaniously to reset the negative ASC
value to the default (-90%), if desired.
ASC limit value, or press the MANUAL key to
abort the procedure. If the MANUAL key is
pressed, any changes to the ASC Limit values
will be discarded and the system will exit the
setup menus, and return to the Operator Level.
the ARROW keys to adjust the positive ASC
limit value, if desired. Press both ARROW keys
simultaniously to reset the positive ASC value
to the default (+90%), if desired.
DP-20 WEB GUIDE CONTROLLER
6
6-33
× 3A.1
SETUP (MAN)
SELECT MENU
BASIC
× 3A.5
SETUP (MAN)
SELECT MENU
CUSTOM
× 3A.5.1
SETUP (MAN)
ASC CONTROL
OFF
× 3A.5.2
SETUP (MAN)
SET ASC LIMITS
-90.0% +90.0%
Ø 3B.5.2
SETUP (MAN)
SET ASC LIMITS
-90.0% +90.0%
Ø 3B.5.2.1
SETUP (MAN)
SET ASC LIMITS
-90.0% +90.0%
Ø 3B.5.2.1
SETUP (MAN)
SET ASC LIMITS
-80.0% +90.0%
Ø 3B.5.2.1
SETUP (MAN)
SET ASC LIMITS
-80.0% +80.0%
3B
MANUAL
Ø -ãããããáÜÜÜÜ+
Ø 3B.5.2.1
SETUP (MAN)
SET ASC LIMITS
-80.0% +75.0%
Figure Sheet 1-862-D