1, Servo-Center Gain; 2, Servo-Center Guide Point - Polaris DP-20 User Manual

2X.1, Servo-Center Gain
1. Press the SETUP key to enter the Setup
2. Press the ENTER key to allow adjustment of
3. Use the ARROW keys to adjust the Gain to the
4. If desired, press both of the ARROW keys
5. Press the ENTER key to store the change or
2X.2, Servo-Center Guide Point
1. Press the SETUP key to enter the Setup
2. Use the ARROW keys to scroll until
3. Press the ENTER key to allow adjustment of
06-05-2007
DP-20 WEB GUIDE CONTROLLER USER MANUAL
AVAILABLE FROM SERVO-CENTER MODE
Menus. The Servo-Center (
be displayed on the LCD Panel.
the Servo-Center Gain. The Gain value will
begin flashing on line 4.
desired level as indicated on line 4. If an
ARROW key is held down, the speed of the
Gain change increases. The change is effective
immediately, but not stored.
simultaneously to reset the Servo-Center Gain
to 5.0% as indicated on line 4.
press the MANUAL key to abort the change.
The system will exit the setup menus, and
return to the Operator Level.
Menus. The Servo-Center (
be displayed on the LCD Panel.
POINT is displayed on line 3.
the Servo-Center Guide Point. The Guide Point
value will begin flashing on line 4.
DP-20 WEB GUIDE CONTROLLER
5 SYSTEM SETUP MENUS
) GAIN menu will
~ƒ
) GAIN menu will
~ƒ
GUIDE
~ƒ
5
5-1
× 2A.1
SETUP (SC)
~ƒ GAIN
ãÜÜÜÜÜÜÜÜÜ 5.0%
× 2A.1.1
SETUP (SC)
~ƒ GAIN
ãÜÜÜÜÜÜÜÜÜ 5.0%
× 2A.1.1
SETUP (SC)
~ƒ GAIN
ããÜÜÜÜÜÜÜÜ 15.0%
× 2A.1.1
SETUP (SC)
~ƒ GAIN
ãÜÜÜÜÜÜÜÜÜ 5.0%
× 2A
SERVO-CENTER
~ƒ -ãããããÜÜÜÜÜ+
×Ø 2C.1
SETUP (SC)
~ƒ GAIN
ãÜÜÜÜÜÜÜÜÜ 5.0%
×Ø 2C.2
SETUP (SC)
~ƒ GUIDE POINT
-ÜÜÜåÜÜÜ+ 0.0%
×Ø 2C.2.1
SETUP (SC)
~ƒ GUIDE POINT
-ÜÜÜåÜÜÜ+ 0.0%
Figure Sheet 1-862-D