3.7, Digital I/O, Enable/Disable; 3.8.1, Test Signals, Sensor Current - Polaris DP-20 User Manual

7. Press the ENTER key to store the change or
3X.3.7, Digital I/O, Enable/Disable
1. Press the SETUP key to enter the Setup
2. Use
3. Press the ENTER key to enter the Advanced
4. Use the ARROW keys to scroll until DIGITAL
5. Press the ENTER key to enter the DIGITAL I/O
6. Use the ARROW keys to scroll to the desired
7. Press the ENTER key to store the change or
3X.3.8.1, Test Signals, Sensor Current
This menu is to be used for viewing the raw sensor signals (in mA) with
no scaling applied.
1. Press the SETUP key to enter the Setup
06-05-2007
DP-20 WEB GUIDE CONTROLLER USER MANUAL
press the MANUAL key to abort the procedure.
The system will exit the setup menus, and
return to the Operator Level.
Menus. The SELECT MENU screen will be
displayed on the LCD Panel.
the ARROW
ADVANCED is displayed on line 4.
Menus. The RESTORE SETTINGS menu will
be displayed.
I/O is displayed on line 3. The current setting is
displayed on Line 4.
menu. The current setting will begin flashing.
setting (ENABLED or DISABLED).
press the MANUAL key to abort the change.
The system will exit the setup menus, and
return to the Operator Level.
Menus. The SELECT MENU screen will be
displayed on the LCD Panel.
DP-20 WEB GUIDE CONTROLLER
keys to scroll until
6
6-27
3A
MANUAL
× -ãããããáÜÜÜÜ+
× 3A.1
SETUP (MAN)
SELECT MENU
BASIC
× 3A.3
SETUP (MAN)
SELECT MENU
ADVANCED
× 3A.3.1
SETUP (MAN)
RESTORE SETTINGS
× 3A.3.7
SETUP (MAN)
DIGITAL I/O (X3)
ENABLED
× 3A.3.7.1
SETUP (MAN)
DIGITAL I/O (X3)
ENABLED
× 3A.3.7.1
SETUP (MAN)
DIGITAL I/O (X3)
DISABLED
3A
MANUAL
× -ãããããáÜÜÜÜ+
× 3A.1
SETUP (MAN)
SELECT MENU
BASIC
Figure Sheet 1-862-D