1.7, Servo-Center Polarity - Polaris DP-20 User Manual

5. Use the ARROW keys to adjust the Gain value
6. If desired, press both of the ARROW keys
7. Press the ENTER key to store the change or
3X.1.7, Servo-Center Polarity
1. Press the SETUP key to enter the Setup
2. Press the ENTER key to enter the BASIC
3. Use the ARROW keys to scroll until
4. Press the ENTER key to allow adjustment of
5. Use the ARROW keys to adjust the Servo-
6. Press the ENTER key to store the change or
06-05-2007
DP-20 WEB GUIDE CONTROLLER USER MANUAL
to the desired level as indicated on line 4. If an
ARROW key is held down, the speed of the
Gain change increases. The change is effective
immediately, but not stored.
simultaneously to reset the Servo-Center Gain
to 5.0% as indicated on line 4.
press the MANUAL key to abort the change.
The system will exit the setup menus, and
return to the Operator Level.
Menus. The SELECT MENU screen will be
displayed.
Menus. The GAIN menu will be displayed.
POLARITY is displayed on line 3.
the Servo-Center Polarity. The current Polarity
setting will begin flashing on line 4.
Center Polarity to the desired setting as
indicated on line 4.
press the MANUAL key to abort the change.
The system will exit the setup menus, and
return to the Operator Level.
DP-20 WEB GUIDE CONTROLLER
6-10
× 3A.1.6.1
SETUP (SC)
~ƒ GAIN
ããÜÜÜÜÜÜÜÜ 8.0%
× 3A.1.6.1
SETUP (SC)
~ƒ GAIN
ãÜÜÜÜÜÜÜÜÜ 5.0%
MANUAL
× -ãããããáÜÜÜÜ+
× 3A.1
SETUP (MAN)
SELECT MENU
BASIC
× 3A.1.1
SETUP (MAN)
GAIN
ãÜÜÜÜÜÜÜÜÜ 10.0%
~ƒ × 3A.1.7
SETUP (MAN)
~ƒ POLARITY
-
× 3A.1.7.1
SETUP (MAN)
~ƒ POLARITY
-
× 3A.1.7.1
SETUP (MAN)
~ƒ POLARITY
+
MANUAL
× -ãããããáÜÜÜÜ+
Figure Sheet 1-862-D
6
3A
3A