2.3, Set Sensor Mode Enable, Line Sensor - Polaris DP-20 User Manual

6. Use the ARROW keys to scroll to the desired
7. Press the ENTER key to store the change or
3X.2.3, Set Sensor Mode Enable, Line Sensor
1. Press the SETUP key to enter the Setup
2. Use the ARROW keys to scroll until SPECIAL
3. Press the ENTER key to enter the Special
06-05-2007
DP-20 WEB GUIDE CONTROLLER USER MANUAL
selection, as indicated on line 4 of the LCD
Panel. YES indicates that the corresponding
sensor mode is enabled. NO indicates it is
disabled.
press the MANUAL key to abort the change.
The system will exit the setup menus, and
return to the Operator Level.
Menus. The SELECT MENU screen will be
displayed on the LCD Panel.
is displayed on line 4.
Menus. The DEADBAND
displayed.
DP-20 WEB GUIDE CONTROLLER
×
SETUP (MAN)
| ×
|YES |YES |NO
×
SETUP (MAN)
| ×
|YES |NO
×
SETUP (MAN)
| ×
|NO | YES |NO
×
SETUP (MAN)
| ×
|YES| NO
×
SETUP (MAN)
| ×
|NO
×
SETUP (MAN)
| ×
|NO
×
ý
SETUP (MAN)
SELECT MENU
BASIC
ý
SETUP (MAN)
SELECT MENU
SPECIAL
ý
SETUP (MAN)
menu will be
DEADBAND
-ÜÜÜÜÜÜÜ+
6
6-15
3A.2.3.2
| Ø | ×Ø |
|
3A.2.3.3
| Ø | ×Ø |
|NO |
3A.2.3.4
| Ø | ×Ø |
|
3A.2.3.5
| Ø | ×Ø |
|YES |
3A.2.3.6
| Ø | ×Ø |
|NO |YES |
3A.2.3.7
| Ø | ×Ø |
|YES |YES |
3A
MANUAL
-ãããããáÜÜÜÜ+
3D.1
3D.2
3D.2.1
0.0%
Figure Sheet 1-862-D