3.6, Set Loss Of Null Output Range - Polaris DP-20 User Manual

3X.3.6, Set Loss Of Null Output Range
1. Press the SETUP key to enter the Setup
2. Use
3. Press the ENTER key to enter the Advanced
4. Use the ARROW keys to scroll until SET LOSS
5. Press the ENTER key to enter the SET LOSS
6. Use the ARROW keys to adjust the Loss Of
06-05-2007
DP-20 WEB GUIDE CONTROLLER USER MANUAL
5. Press the ENTER key to enter the SET
OUTPUT DELAY menu. The current delay time
will begin flashing.
6. Use the ARROW keys to adjust the delay time
to the desired setting (in seconds). If an
ARROW key is held down, the speed of the
delay change increases. If desired, press both
ARROW keys simultaneously to reset the delay
to 0.00s.
7. Press the ENTER key to store the change or
press the MANUAL key to abort the change.
The system will exit the setup menus, and
return to the Operator Level.
Menus. The SELECT MENU screen will be
displayed on the LCD Panel.
the ARROW
ADVANCED is displayed on line 4.
Menus. The RESTORE SETTINGS menu will
be displayed.
OF NULL is displayed on line 3. The current
Loss Of Null value is displayed on line 4.
OF NULL menu. The current Loss Of Null value
will begin flashing.
Null to the desired setting. If desired, press
both ARROW keys simultaneously to reset the
value to 20%.
DP-20 WEB GUIDE CONTROLLER
keys to scroll until
6
6-26
× 3A.3.5.1
SETUP (MAN)
SET OUTPUT DELAY
OUTPUT B: 0.00s
× 3A.3.5.1
SETUP (MAN)
SET OUTPUT DELAY
OUTPUT B: 5.00s
3A
MANUAL
× -ãããããáÜÜÜÜ+
× 3A.1
SETUP (MAN)
SELECT MENU
BASIC
× 3A.3
SETUP (MAN)
SELECT MENU
ADVANCED
× 3A.3.1
SETUP (MAN)
RESTORE SETTINGS
× 3A.3.6
SETUP (MAN)
SET LOSS OF NULL
OUTPUT: 20%
× 3A.3.6.1
SETUP (MAN)
SET LOSS OF NULL
OUTPUT: 20%
× 3A.3.6.1
SETUP (MAN)
SET LOSS OF NULL
OUTPUT: 30%
Figure Sheet 1-862-D