1.3, Guide Polarity - Polaris DP-20 User Manual

3. Use the ARROW keys to scroll until GUIDE
4. Press the ENTER key to allow adjustment of
5. Use the ARROW keys to adjust the System
6. If desired, press both of the ARROW keys
7. Press the ENTER key to store the change or
3X.1.3, Guide Polarity
1. Press the SETUP key to enter the Setup
2. Press the ENTER key to enter the BASIC
3. Use the ARROW keys to scroll until GUIDE
4. If necessary, press the SENSOR key to select
06-05-2007
DP-20 WEB GUIDE CONTROLLER USER MANUAL
POINT is displayed on line 3.
the System Guide Point. The current Guide
Point value will begin flashing on line 4.
Guide Point to the desired position. The LCD
Panel is scaled to ±100% from the center of the
sensor bandwidth. The default range of the
Guide Point adjustment is ±80% of the sensor
bandwidth, but this range will be limited if a
Deadband above 10% is being used. ASC
settings can also limit the Guide Point range.
The Guide Point
immediately, but not yet stored.
simultaneously to reset the System Guide Point
to the center of the available range, as
indicated on line 4.
press the MANUAL key to abort the change.
The system will exit the setup menus, and
return to the Operator Level.
Menus. The SELECT MENU screen will be
displayed on the LCD Panel.
Menus. The GAIN menu will be displayed.
POLARITY is displayed on line 3.
the desired sensor mode.
DP-20 WEB GUIDE CONTROLLER
change is effective
6
6-2
×Ø 3C.1.2
SETUP (MAN)
GUIDE POINT
-ÜÜÜåÜÜÜ+ 0.0%
×Ø 3C.1.2.1
SETUP (MAN)
GUIDE POINT
-ÜÜÜÜåÜÜÜÜ+ 0.0%
×Ø 3C.1.2.1
SETUP (MAN)
GUIDE POINT
-ÜÜÜÜåÜÜ+ +20.0%
×Ø 3C.1.2.1
SETUP (MAN)
GUIDE POINT
-ÜÜÜÜåÜÜÜÜ+ 0.0%
3C
MANUAL
×Ø -ãããããáÜÜÜÜ+
×Ø 3C.1
SETUP (MAN)
SELECT MENU
BASIC
×Ø 3C.1.1
SETUP (MAN)
GAIN
ãÜÜÜÜÜÜÜÜÜ 10.0%
×Ø 3C.1.3
SETUP (MAN)
GUIDE POLARITY
-
× 3A.1.3
SETUP (MAN)
GUIDE POLARITY
-
Figure Sheet 1-862-D