3.3, Set Password, Change Password - Polaris DP-20 User Manual

6. Using the proper keys, enter the current
7. Press the ENTER key to accept the password.
8. Use the ARROW keys to select DISABLE.
9. Press the ENTER key to delete the password
3X.3.3, Set Password, Change Password
(Use these menu instructions only if a password is currently stored).
06-05-2007
DP-20 WEB GUIDE CONTROLLER USER MANUAL
password. Each key press is indicated by an "*"
on Line 4.
CHANGE and DISABLE will be displayed on
Line 4. CHANGE will be flashing.
DISABLE will then begin flashing.
or press the MANUAL key to abort the
procedure. The system will exit the setup
menus, and return to the Operator Level.
1. Press the SETUP key to enter the Setup
Menus. The SELECT MENU screen will be
displayed on the LCD Panel.
2. Use the ARROW
ADVANCED is displayed on line 4.
3. Press the ENTER key to enter the Advanced
Menus. The RESTORE SETTINGS menu will
be displayed.
4. Use the ARROW keys to scroll until SET
PASSWORD is
(ENABLED) which is displayed on Line 4,
indicates that a password is currently enabled.
5. Press the ENTER key to enter the SET
PASSWORD menu. ENTER PASSWORD will
be displayed on line 3.
DP-20 WEB GUIDE CONTROLLER
keys to scroll
displayed on line
× X3A.3.3
SETUP (MAN)
ENTER PASSWORD
******
× X3A.3.3.1
SETUP (MAN)
SET PASSWORD
CHANGE DISABLE
× X3A.3.3.1
SETUP (MAN)
SET PASSWORD
CHANGE DISABLE
× 3A.3.3.5
SETUP (MAN)
(NO PASSWORD)
MANUAL
× -ãããããáÜÜÜÜ+
× 3A.1
SETUP (MAN)
SELECT MENU
BASIC
until
× 3A.3
SETUP (MAN)
SELECT MENU
ADVANCED
× 3A.3.1
SETUP (MAN)
RESTORE SETTINGS
× X3A.3.3
SETUP (MAN)
3.
SET PASSWORD
(ENABLED)
× X3A.3.3
SETUP (MAN)
ENTER PASSWORD
Figure Sheet 1-862-D
6
6-23
3A