1.4, Calibration, Line Sensor, Center Of Line Guiding - Polaris DP-20 User Manual

7. Press the ENTER key. WAIT... will be displayed
8. Once the delay has ended, COVER SENSOR
9. Press the ENTER key. If the contrast is
10. If the contrast is not sufficient for guiding,
3X.1.4, Calibration, Line Sensor, Center of Line Guiding
1. Press the SETUP key to enter the Setup
2. Press the ENTER key to enter the BASIC
3. Use
4. Press
06-05-2007
DP-20 WEB GUIDE CONTROLLER USER MANUAL
for a few seconds on line 4 of the LCD Panel.
Maintain the web position during this wait
period.
will be displayed on line 2. Fully cover the
sensor field of view with the web material to be
guided (see graphic at right). The sensor signal
is displayed on Line 3.
sufficient for guiding, SUCCESSFUL will be
displayed for a few seconds on line 2, then the
unit will automatically exit the menus and return
to the Operator Level.
—
OR
FAILED will be displayed on line 2. Press the
MANUAL key to exit the setup menus and
return to the Operator Level.
procedure, as necessary.
Menus. The SELECT MENU screen will be
displayed on the LCD Panel.
Menus. The GAIN menu will be displayed.
the ARROW
CALIBRATION is displayed on line 3.
the ENTER
CALIBRATION menu. SELECT SENSOR will
be displayed on line 3.
DP-20 WEB GUIDE CONTROLLER
—
Repeat this
keys to scroll until
key to enter the
6
6-4
Ø 3B.1.4.2
UNCOVER SENSOR
-ÜÜÜÜÜÜÜÜÜÜ+ 0%
WAIT...
Ø 3B.1.4.3
COVER SENSOR
-ãããããããããá+ 95%
Web
Sensor
Ø 3B.1.4.4
SUCCESSFUL
-ãããããããããá+ 95%
3B
MANUAL
Ø -ãããããáÜÜÜÜ+
Ø 3B.1.4.6
FAILED
-áÜÜÜÜÜÜÜÜÜ+ 3%
ý 3D.1
SETUP (MAN)
SELECT MENU
BASIC
ý 3D.1.1
SETUP (MAN)
GAIN
ãÜÜÜÜÜÜÜÜÜ 10.0%
ý 3D.1.4
SETUP (MAN)
CALIBRATION
ý 3D.1.4.1
SETUP (MAN)
SELECT SENSOR
(X4)
Figure Sheet 1-862-D