2.3, Set Sensor Mode Enable, Edge Sensors - Polaris DP-20 User Manual

6. Use the ARROW keys to scroll to the desired
7. Press the ENTER key to store the change or
3X.2.3, Set Sensor Mode Enable, Edge Sensors
1. Press the SETUP key to enter the Setup
2. Use the ARROW keys to scroll until SPECIAL
3. Press the ENTER key to enter the Special
4. Use the ARROW keys to scroll until SENSOR
5. Press the ENTER key to enter the Sensor
06-05-2007
DP-20 WEB GUIDE CONTROLLER USER MANUAL
selection as indicated on line 4 of the LCD
Panel. YES indicates that the corresponding
operation mode is enabled. NO indicates it is
disabled.
press the MANUAL key to abort the change.
The system will exit the setup menus, and
return to the Operator Level.
Menus. The SELECT MENU screen will be
displayed on the LCD Panel.
is displayed on line 4.
Menus. The DEADBAND
displayed.
ENABLE is displayed on line 3. The current
selection is displayed on Line 4.
Enable menu. The current selection will begin
flashing on line 4. The last digit of the menu
number will vary according to the current
selection.
DP-20 WEB GUIDE CONTROLLER
×
SETUP (MAN)
|AUTO|SC
|NO
×
SETUP (MAN)
|AUTO|SC
|YES |NO
×
SETUP (MAN)
|AUTO|SC
|YES |YES |YES |
×
×
SETUP (MAN)
SELECT MENU
BASIC
×
SETUP (MAN)
SELECT MENU
SPECIAL
×
SETUP (MAN)
menu will be
DEADBAND
-ÜÜÜÜÜÜÜ+
×
SETUP (MAN)
SENSOR ENABLE
| ×
×
SETUP (MAN)
| ×
|YES |YES |YES |
6
6-14
3A.2.2.2
|MAN |
|YES |YES |
3A.2.2.3
|MAN |
|YES |
3A.2.2.4
|MAN |
3A
MANUAL
-ãããããáÜÜÜÜ+
3A.1
3A.2
3A.2.1
0.0%
3A.2.3
| Ø | ×Ø |
3A.2.3.1
| Ø | ×Ø |
Figure Sheet 1-862-D