1.6, Servo-Center Gain - Polaris DP-20 User Manual

6. Press the ENTER key to begin the Auto Setup.
7. Once the Auto Setup is complete, if it was
8. Once the Auto Setup is complete, if it was not
3X.1.6, Servo-Center Gain
1. Press the SETUP key to enter the Setup
2. Press the ENTER key to enter the BASIC
3. Use the ARROW keys to scroll until
4. Press the ENTER key to allow adjustment of
06-05-2007
DP-20 WEB GUIDE CONTROLLER USER MANUAL
If the web is not positioned near the center of
the sensor field of view, the LCD Panel will
display POSITION WEB IN CENTER OF
SENSOR. Once the web is moved to near the
center of the sensor field of view, the Auto
Setup procedure will continue.
successful, SUCCESSFUL will be displayed for
a few seconds on line 3, then the unit will
automatically exit the menus and return to the
Operator Level. The Guide Point is set to 0. If a
Deadband was stored before Auto Setup was
performed, the Deadband setting is restored.
—
OR
successful, FAILED will be displayed on line 3.
Press the MANUAL key to exit the setup menus
and return to the Operator Level. The Guide
Point and Deadband are restored to the values
stored before the Auto Setup was attempted.
Repeat this procedure, as required.
Menus. The SELECT MENU screen will be
displayed on the LCD Panel.
Menus. The GAIN menu will be displayed.
displayed on line 3.
the Servo-Center Gain. The current Gain value
will begin flashing on line 4.
DP-20 WEB GUIDE CONTROLLER
—
GAIN is
~ƒ
6
6-9
Ø 3B.1.5.3
POSITION WEB IN
CENTER OF SENSOR
-ãããããÜÜÜÜÜ+
Ø 3B.1.5.4
SETUP (MAN)
SUCCESSFUL
3B
MANUAL
Ø -ãããããáÜÜÜÜ+
Ø 3B.1.5.3
SETUP (MAN)
FAILED
× 3A.1
SETUP (MAN)
SELECT MENU
BASIC
× 3A.1.1
SETUP (MAN)
GAIN
ãÜÜÜÜÜÜÜÜÜ 10.0%
× 3A.1.6
SETUP (MAN)
~ƒ GAIN
ãÜÜÜÜÜÜÜÜÜ 5.0%
× 3A.1.6.1
SETUP (SC)
~ƒ GAIN
ãÜÜÜÜÜÜÜÜÜ 5.0%
Figure Sheet 1-862-D