2.7, Set Sensor Type - Polaris DP-20 User Manual

7. Press the ENTER key to store the change or
3X.2.7, Set Sensor Type
1. Press the SETUP key to enter the Setup
2. Use the ARROW keys to scroll until SPECIAL
3. Press the ENTER key to enter the Special
4. Use the ARROW keys to scroll until SET
5. Press the ENTER key to enter the SET
6. Use the ARROW keys to scroll to the desired
7. Press the ENTER key to store the change or
06-05-2007
DP-20 WEB GUIDE CONTROLLER USER MANUAL
press the MANUAL key to abort the procedure.
The system will exit the setup menus, and
return to the Operator Level.
Menus. The SELECT MENU screen will be
displayed on the LCD Panel.
is displayed on line 4.
Menus. The DEADBAND
displayed.
SENSOR TYPE is displayed on line 3. The
current sensor type is displayed on Line 4.
SENSOR TYPE menu. The current sensor type
begins flashing on line 4.
sensor type, EDGE
SENSOR as indicated on line 4.
press the MANUAL key to abort the procedure.
The system will exit the setup menus, and
return to the Operator Level.
DP-20 WEB GUIDE CONTROLLER
menu will be
SENSOR or LINE
6
6-19
3A
MANUAL
× -ãããããáÜÜÜÜ+
× 3A.1
SETUP (MAN)
SELECT MENU
BASIC
× 3A.2
SETUP (MAN)
SELECT MENU
SPECIAL
× 3A.2.1
SETUP (MAN)
DEADBAND
-ÜÜÜÜÜÜÜ+ 0.0%
× 3A.2.7
SETUP (MAN)
SET SENSOR TYPE
EDGE SENSOR ×Ø
× 3A.2.7.1
SETUP (MAN)
SET SENSOR TYPE
EDGE SENSOR ×Ø
ý 3D.2.7.2
SETUP (MAN)
SET SENSOR TYPE
LINE SENSOR ýŁ
3D
MANUAL
ý -ãããããáÜÜÜÜ+
Figure Sheet 1-862-D