Features Of The Lcd Panel - Polaris DP-20 User Manual

Features of the LCD Panel

× 3A.2.3.1
SETUP (MAN)
GUIDE POLARITY
+
× X3A.2.3.1
SETUP (MAN)
GUIDE POLARITY
+
× 2A
SERVO CENTER
~ƒ -ãããããÜÜÜÜÜ+
×Ø 2C.1.1
SETUP (SC)
~ƒ GAIN
ãÜÜÜÜÜÜÜÜÜ 5.0%
* 1A
AUTOMATIC
× -ãããããÜÜÜÜÜ+
(*) 1A
AUTOMATIC
× -ãããããÜÜÜÜÜ+
? 1A
AUTOMATIC
× -ãããããÜÜÜÜÜ+
×Ø 2C.1.1
SETUP (SC)
~ƒ GAIN
ãÜÜÜÜÜÜÜÜÜ 5.0%
06-05-2007
DP-20 WEB GUIDE CONTROLLER USER MANUAL
LINE 1 This line contains the menu number. This number may
contain 2 or more digits. The first digit indicates the current operation
mode. The second digit indicates the current sensor mode.
subsequent digits indicate the current Setup Menu (when applicable).
See "SETUP MENU STRUCTURE" for more information on the menu
number.
LINE 1 When the letter "X" preceeds the menu number, this indicates
that the selected menu is password protected. When an attempt is
made to enter this menu, a password will be requested. The correct
password must be entered before access to this menu is allowed.
LINE 1 While in Servo-Center mode, the symbol of the current sensor
selection is displayed in this line.
LINE 1 While in the setup menus, the symbol of the current sensor
selection is displayed in this line.
LINE 1 A command present on the Digital I/O is indicated by an
asterisk in this line.
LINE 1 An External Lock command present on the Digitital I/O is
indicated by an asterisk surrounded by parentheses in this line.
LINE 1 An unrecognized command present on the parallel port is
indicated by a question mark in this line.
LINE 1 While in any of the setup menus, a flashing dot (see arrow) in
this line indicates that a timer is running. The DP-20 is waiting for a
response from the operator. If no response is detected in 3 minutes, the
unit will return to the Operator Level. If this dot is not flashing, no timer
is active.
DP-20 WEB GUIDE CONTROLLER
2
2-2
The
Figure Sheet 1-862-D