3.3, Set Password, Delete Password - Polaris DP-20 User Manual

6. Using the proper keys, enter the desired
7. Press the ENTER key to accept the password.
8. Using the proper keys, re-enter the desired
9. Press the ENTER key to store the password or
3X.3.3, Set Password, Delete Password
(Use these menu instructions only if a password is currently stored).
1. Press the SETUP key to enter the Setup
2. Use
3. Press the ENTER key to enter the Advanced
4. Use the ARROW keys to scroll until SET
5. Press the ENTER key to enter the SET
06-05-2007
DP-20 WEB GUIDE CONTROLLER USER MANUAL
password. The password can be 1 to 6 keys in
length. Each key press is indicated by an "*" on
Line 4. The MANUAL and ENTER keys are not
allowed to be used in passwords.
The display will then display REENTER
PASSWORD on line 3.
password. The password must be the same as
previously entered. If a different password is
entered, "Wrong Password" wil be displayed.
press the MANUAL key to abort the procedure.
The system will exit the setup menus, and
return to the Operator Level.
Menus. The SELECT MENU screen will be
displayed on the LCD Panel.
the ARROW
ADVANCED is displayed on line 4.
Menus. The RESTORE SETTINGS menu will
be displayed.
PASSWORD is displayed
(ENABLED) which is displayed on Line 4,
indicates that a password is currently enabled.
PASSWORD menu. The LCD Panel will display
ENTER PASSWORD on line 3.
DP-20 WEB GUIDE CONTROLLER
keys to scroll until
on line
6-22
× 3A.3.3.2
SETUP (MAN)
ENTER PASSWORD
******
× 3A.3.3.3
SETUP (MAN)
REENTER PASSWORD
× 3A.3.3.3
SETUP (MAN)
REENTER PASSWORD
******
× 3A.3.3.4
SETUP (MAN)
PASSWORD STORED
MANUAL
× -ãããããáÜÜÜÜ+
× 3A.1
SETUP (MAN)
SELECT MENU
BASIC
× 3A.3
SETUP (MAN)
SELECT MENU
ADVANCED
× 3A.3.1
SETUP (MAN)
RESTORE SETTINGS
× X3A.3.3
SETUP (MAN)
3.
SET PASSWORD
(ENABLED)
× X3A.3.3
SETUP (MAN)
ENTER PASSWORD
Figure Sheet 1-862-D
6
3A