LPOD C-/Ku-Band Outdoor Amplifier/Block Up Converter
Ethernet Management
Alarm Mask
Using the drop-down menus, select each alarm as either Fault, Alarm or Masked for:
•
Low Forward RF Power
•
Fan Speed
•
LNB 22V Power Supply
•
External Reference Lock Detected
•
LNB Current Detect.
Once the desired configuration settings have been made in this section, the user should then click
[Change Alarm Mask] to save these changes. If it is desired to revert back to the previously
assigned Alarm Mask settings, the user should instead click [Reset].
To update the page with the current viewing and operating configuration, click [Refresh].
4–22
Revision 3
MN-LPOD