Comtech EF Data LPOD Hardware Installation And Operation Manual page 150

LPOD C- / Ku-Band Outdoor Amplifier/ Block Up Converter (BUC)
Appendix B
Command
(Instruction
Parameter Type
Code and
Qualifier)
External XRM=
O
Reference Mute
Arguments for
Description of Arguments
Command or
(Note that all arguments are printable ASCII
Response to
Query
1 byte Command or Query.
numeric Enables or disables the external reference not present
mute. When the XRM command is enabled the unit will
mute if an external reference oscillator is not detected.
Where:
0 = Disable
1 = *Enable
Example: <1/XRM=1'cr'
Note: To enable this command the internal reference
oscillator option must be installed; otherwise, a mode
error will result. A hardware mute condition generated
by the XRM mute is one of the conditions that can
cause the MUT command to return MUT=2.
characters)
XRM=
XRM?
MSK*
B–32
Query
Response to
(Instruction
Command
Code and
(Target to Controller)
qualifier)
XRM?
Revision 3
MN-LPOD
Response to
Query
(Target to
Controller)
XRM=x
(See Description
of Arguments for
details)