Comtech EF Data LPOD Hardware Installation And Operation Manual page 68

LPOD C-/Ku-Band Outdoor Amplifier / Block Up Converter (BUC)
Flash Upgrading
Run the CReflash application by either double clicking the application icon from the
10
temporary folder (or Desktop), or by selecting the application from the Program Files menu:
a) Type in the correct IP address of the LPOD.
b) Select the firmware bulk image file as identified in Step 3. Type in the name, or select
the file using [Browse].
c) Click [Start] to begin the flash upgrade procedure.
Check that the transfer completed successfully:
11
Verify the file transfer.
12
a) Reboot the LPOD.
b) To verify that the new file has loaded, use the firmware version verification
procedure outlined in Step 1.
(a)
(b)
(c)
►
3–4
Revision 3
MN-LPOD