Appendix B: Using The Interactive Flat Panel On-Screen Display Menu; Accessing The On-Screen Display Menu - Smart Technologies SMART Room System SRS-LYNC-XS Setup And Maintenance Manual

Appendix B
Using the interactive flat panel
on-screen display menu

Accessing the on-screen display menu

Changing settings in the on-screen display menu
SMART Board 8055i interactive flat panel on-screen display menu
SMART Board 8070i-G4 interactive flat panel on-screen display menu
SMART Board 8084i-G4 interactive flat panel on-screen display menu
You can access the on-screen display menu using either the remote control or the menu control
panel.
Accessing the on-screen display menu
You can access the on-screen display menu using the remote control or the menu control panel
located on the bottom of the interactive flat panel.
The remote control requires two 1.5V AAA batteries.
WARNING
To reduce the risk associated with leaking batteries:
use only AAA type batteries
l
do not mix used and new batteries
l
orient the battery's plus (+) and minus (-) terminals according to the markings found on the
l
remote control
do not leave the batteries in the remote control for an extended period
l
do not heat, disassemble, short or recharge the batteries, or expose them to fire or high
l
temperature
87 smarttech.com/kb/170450
-
87
88
89
94
100