Configuring Lync Room System Software - Smart Technologies SMART Room System SRS-LYNC-XS Setup And Maintenance Manual

CHAPTER 4
CONFIGURING YOUR ROOM SYSTEM'S SOFTWARE

Configuring Lync Room System software

NOTE
The following procedure documents SMART's recommended configuration of Lync Room
System software for a typical Lync infrastructure setup. Refer to the Microsoft Lync Room System
Deployment Guide for detailed deployment information (see Preparation information on
page 9).
To configure Lync Room System software
1. Click Lync Settings, and then set the following controls:
Control
Credentials
User Name
SIP URI
Password
Proxy Credentials
Configuration Modes If your organization maintains a mixed environment of Lync 2010 and
Quality Control
Logging
TIP
You can record this information in the SMART Room System for Microsoft Lync software
configuration guide for future reference.
33 smarttech.com/kb/170450
Procedure
Type the Lync account's full domain name in one of two formats
depending on how your organization's servers are configured
(for example, yourdomain\room1 or room1@yourdomain.com).
Type the Lync account's SIP URI
(for example, room1@yourdomain.com).
NOTE
If the domain name used in the Lync account's SIP URI is different
from the domain name on the Lync Web Service certificate, see
Adding trusted domains to your room system on page 76.
Type the Lync account's password.
Select Use Lync Account credentials.
Lync 2013 server pools, select Manual, and then type the address of
the Lync 2013 server pool in the Internal Server Name box.
Optionally, enable the Customer Experience Program to assist with
troubleshooting.
Optionally, select Full in the drop-down list, and then enable
Windows® Event Logging to assist with troubleshooting.
-