Orienting The Interactive Flat Panels - Smart Technologies SMART Room System SRS-LYNC-XS Setup And Maintenance Manual

CHAPTER 6
MAINTAINING YOUR ROOM SYSTEM

Orienting the interactive flat panels

Typically, you need to orient the interactive flat panels during initial configuration only (see
Configuring SMART Settings on page 30). However, you might need to orient the interactive flat
panels again if the location of users' touch is misinterpreted (a pointer appears a distance from the
actual contact or on a different display than the one being touched).
IMPORTANT
To orient the interactive flat panels, you need the room system administrator account's user
name and password. You're unable to orient the interactive flat panels in meeting mode.
To orient an interactive flat panel
1. On the console, press Options, and then press Settings.
The Enter your credentials screen appears.
2. Type the room system administrator account's user name and password in the text boxes, and
then press Authenticate.
The room system restarts.
3. Type the room system administrator account's password, and then press ENTER.
The Lync Admin Console appears.
4. Press the Orient button
The orientation screen appears.
58 smarttech.com/kb/170450
on the interactive flat panel's color select module.
-