Replacing A Pen Nib; Using The Kickstands To Access Connectors - Smart Technologies SMART Room System SRS-LYNC-XS Setup And Maintenance Manual

CHAPTER 6
MAINTAINING YOUR ROOM SYSTEM

Replacing a pen nib

To prevent damage to your interactive flat panels' anti-glare coating, replace a pen nib if it
becomes worn. Replacement pen nibs are included with your room system, and you can purchase
additional replacements from your authorized SMART reseller (smarttech.com/where) or the
SMART Parts Store (parts.smarttech.com).
To replace a pen nib
1. Grasp the worn nib on the pen with a pair of pliers, and then pull and twist the nib loose.
2. Press the replacement nib into the pen.

Using the kickstands to access connectors

For some maintenance and troubleshooting procedures, you might need to access the interactive
flat panels' connectors. You can use the kickstands to access these connectors.
To deploy the kickstands
1. Release the kickstand locks by pulling them down.
2. Pull the bottom of the interactive flat panel away from the
wall.
62 smarttech.com/kb/170450
-