Smart Settings Controls - Smart Technologies SMART Room System SRS-LYNC-XS Setup And Maintenance Manual

APPENDIX A
USING THE LYNC ADMIN CONSOLE AND SMART SETTINGS
Control
Password Renewal
Auto-Renew Password
Account Type
On-Premise
Office 365
OEM Settings
SMART Settings
SRS Licensing Tool
SMART Settings controls
Control
SMART Room System Settings
Business Hours
12-Hour Setting
Custom Setting
Business Days
SMART Hardware Settings
SMART Board
Orient
84 smarttech.com/kb/170450
Procedure
Turn On to enable automatic renewing of the
Lync account password, and then type the
number of days between renewals in the
Renewal Frequency in Days box.
OR
Turn Off to disable automatic renewing of the
Lync account password.
Select if your organization uses an on-premise
Lync Server.
Select if your organization uses an Office 365™-
hosted Lync Server, and then type the
connection point in the Office 365 Connection
Point box.
Press to open SMART Settings.
Press to check the status of your room system's
product key and provide a MAK key if your Lync
infrastructure doesn't include a KMS server.
Procedure
Select if your organization's business day is 12
hours, and then select the appropriate time
frame in the drop-down list.
Select if your organization's business day isn't 12
hours, and then select the start and end times
for your organization's business day.
Select the days of the week your organization
operates.
Press to orient the interactive flat panel.
Notes (if any)
SMART recommends that you disable
automatic renewing of the Lync account
password.
See SMART Settings controls below.
See Checking the status of the Lync Room
System software product key on page 34.
Notes (if any)
Your room system enters power saving
mode outside of the business hours you
define on this page.
In room systems with two interactive flat
panels, there are two SMART Board
pages under SMART Hardware Settings
(one for each interactive flat panel).
See Orienting the interactive flat panels
on page 58.
-