Chapter 3: Installing Your Room System's Hardware - Smart Technologies SMART Room System SRS-LYNC-XS Setup And Maintenance Manual

Chapter 3
Installing your room system's
hardware
This chapter is intended for installers. Before they install the room system's hardware, installers
should read this chapter along with the hardware installation instructions (see Installation
instructions on page 9) included with the room system.
WARNING
Improper installation of your room system's hardware can result in personal injury and product
damage.
Before installing your room system's hardware, do the following.
Task
Review the room temperature and humidity requirements in the room system's
specifications (see Specifications on page 8).
Save all product packaging so that it's available if you need to transport the room system
at a later date.
NOTE
If the original packaging isn't available, you can purchase new product packaging from
your authorized SMART reseller (smarttech.com/where).
13 smarttech.com/kb/170450
-