Presence Detection; Components - Smart Technologies SMART Room System SRS-LYNC-XS Setup And Maintenance Manual

CHAPTER 1
WELCOME

Presence detection

Each interactive flat panel has two presence detection sensors on its frame that can detect people
up to 16' (5 m) away. When the sensors detect people in the meeting room, the room system turns
on. When the sensors no longer detect people in the meeting room, the room system enters
Standby mode.

Components

Your room system consists of the following major components:
Part no. Description
SBID 8055i SMART Board 8055i interactive flat panel
SBID 8070i-G4 SMART Board 8070i-G4 interactive flat panel
SBID 8084i-G4 SMART Board 8084i-G4 interactive flat panel
AM70-L Lync appliance
CP311 Console
CAM301 Camera
MIC500 Table microphones
MIX500 Audio processor
CSR500 Speakers
1019403 Video connection harness for guest laptops
NOTE
Other, minor components are documented elsewhere in this guide.
3 smarttech.com/kb/170450
Room sizes
Extra small
Medium with dual panels (×2)
Small
Large (×2)
Medium
Extra large (×2)
All
All
All
All
All
All
All
-