Testing Your Room System - Smart Technologies SMART Room System SRS-LYNC-XS Setup And Maintenance Manual

CHAPTER 4
CONFIGURING YOUR ROOM SYSTEM'S SOFTWARE
3. If the room system is licensed, continue to the next procedure.
OR
If the room system isn't licensed, do one of the following:
Wait for the KMS server to allocate a product key to the room system, and then repeat
o
steps 1 to 2.
NOTE
You can continue using the Lync Room System software during the trial period.
Type the MAK provided by Microsoft in the MAK key box, click Activate Key, and then
o
continue to the next procedure.

Testing your room system

To test your room system
1. Click Lync Settings.
2. If your organization uses an on-premise Lync Server, click Make a Test Call, and then follow
the on-screen instructions to test call functions.
3. Click Test Meet Now, and then follow the on-screen instructions to test server connections
and video functions.
4. If you're unable to complete a test call or test meeting, wait one or two minutes and then try
steps 2 and 3 again.
TIPS
If you're still unable to complete a test call or test meeting, you can verify the room
o
system's Lync account credentials by using them on a computer with Lync 2013 client
software.
If the audio is too loud or too quiet, adjust the audio settings in the Lync Settings tab.
o
35 smarttech.com/kb/170450
-