Turning Off Your Room System - Smart Technologies SMART Room System SRS-LYNC-XS Setup And Maintenance Manual

CHAPTER 6
MAINTAINING YOUR ROOM SYSTEM

Turning off your room system

For some maintenance procedures, you need to turn off your room system.
To turn off your room system
1. On the console, press Options, and then press Restart.
2. When the screens are blank or when the SMART logo appears, complete the appropriate
procedure for the room size:
Room size
Extra small room
Small room
53 smarttech.com/kb/170450
Procedure
a. Press the power button on the Lync appliance enclosure for six
seconds.
b. Flick the power switch on the bottom of the interactive flat
panel.
Flick the power switch on the bottom of the interactive flat
panel.
-