Before Configuring Your Room System's Software; Starting Your Room System For The First Time; Starting Your Room System - Smart Technologies SMART Room System SRS-LYNC-XS Setup And Maintenance Manual

CHAPTER 4
CONFIGURING YOUR ROOM SYSTEM'S SOFTWARE

Before configuring your room system's software

Before configuring your room system's software, ensure the following prerequisites are in place:
Task
The steps in Preparing for your room system on page 11 have been completed.
You have the necessary information to connect the room system to the Lync Server,
including the following:
IP addresses for DNS servers (if not configured automatically from the network via
l
DHCP)
Administrator user name and password to be applied to the room system
l
Lync appliance computer name for network presence
l
Lync account name and password for the room system
l
SIP URI address
l
TIP
You can record this information in the SMART Room System for Microsoft Lync software
configuration guide for future reference.
A USB mouse and keyboard are connected to the Lync appliance for use during the
software configuration.

Starting your room system for the first time

Starting your room system

The procedure for starting your room system depends on the room size.
Room size
Extra small room
Small room
Medium room
Medium room with dual panels
Large room
Extra large room
18 smarttech.com/kb/170450
-
Procedure
Page 19
Page 19
Page 20
Page 22
Page 23
Page 24