Smart Board 8084I-G4 Interactive Flat Panel On-Screen Display Menu - Smart Technologies SMART Room System SRS-LYNC-XS Setup And Maintenance Manual

APPENDIX B
USING THE INTERACTIVE FLAT PANEL ON-SCREEN DISPLAY MENU
SMART Board 8084i-G4 interactive flat panel
on-screen display menu
Option
PICTURE
Picture Mode
Picture Mode
In Bright
In Dark
Light Threshold
Sensing Lux
Backlight
Contrast
Brightness
Sharpness
100 smarttech.com/kb/170450
Values Function
Vivid Sets the picture mode
Standard
Ambient
Expert1
Expert2
1–100 Sets the image brightness for
brightly lit rooms
0–99 Sets the image brightness for dimly
lit rooms
[Number] Sets the light threshold
[N/A] Shows the current illuminance level
of the room (in lux)
0–100 Sets the backlight level of the
image
0–100 Sets the brightness of the image in
relation to the background
0–100 Sets the overall brightness of the
image and background
0–50 Sets the image sharpness
Notes (if any)
SMART recommends that this
option be set to Standard.
The other options in the Picture
Mode menu change depending on
which value you select for this
option.
The options documented in this
table are those that appear when
you select Vivid, Standard or
Ambient in this option.
Alternatively, you can press the
PSM button on the remote control
to access this option.
You can modify this option only if
you select Ambient in Picture
Mode .
The value of this menu option can't
be less than the value of In Dark .
You can modify this option only if
you select Ambient in Picture
Mode .
The value of this menu option can't
be more than the value of In Bright .
You can modify this option only if
you select Ambient in Picture
Mode .
This option only provides
information. You're unable to
modify it.
SMART recommends that this
option be set to 100.
SMART recommends that this
option be set to 84.
SMART recommends that this
option be set to 63.
Alternatively, you can press the
BRIGHTNESS buttons on the
remote control.
SMART recommends that this
option be set to 0.
-