Locating Power And Status Lights - Smart Technologies SMART Room System SRS-LYNC-XS Setup And Maintenance Manual

CHAPTER 7
TROUBLESHOOTING YOUR ROOM SYSTEM

Locating power and status lights

Your room system's components have power and status lights, which you can use when resolving
common issues with the room system.
No. Component
1 Interactive flat panel
2 Interactive flat panel
3 Console
4 Camera
5 Camera
6 Microphones
7 Speakers
NOTE
The following power and status lights aren't shown in the above diagram:
Power, hard drive activity and network connection lights on the Lync appliance
l
Power light on the Lync appliance enclosure (room systems with SMART Board 8055i
l
interactive flat panels only)
69 smarttech.com/kb/170450
Light
Power
Touch system status
Power and status
Video capture
Service
Microphone
Power
-