Working basis
Locking the machine in place
To lock the machine in place:
1. Insert the locking peg (2) with the appropriate end into the slot (1).
Removing the lock
To remove the lock:
1. Pull the locking peg (2) out of the slot (1).
3.7 Putting the machine into position
For some settings, the machine must be put into a certain position, using
the hand crank on the arm cover.
Fig. 13: Putting the machine into position
①
(1) - Hand crank
To set the machine into position:
1. Press down and turn the hand crank (1) until the machine is in the
setting position.
26
Service Instructions 911-210-10 - 00.0 - 06/2020