Table of Contents
Advertisement
14.1 Cleaning
Areas requiring special cleaning
• Area under the throat plate
• Area around the hook
• Area around the thread take-up disk
• Thread trimmer
• Area around the needle
• Air inlet openings on the motor fan mesh
• Oil pan
To clean the machine:
1. Switch off the machine.
2. If present, disassemble the edge pinker ( p. 54).
3. Remove any lint and thread remnants using a compressed air gun or
4. If present, empty the waste bin of the edge pinker.
72
WARNING
Risk of injury from flying particles!
Flying particles can enter the eyes, causing injury.
Wear safety goggles.
Hold the compressed air gun so that the particles
do not fly close to people.
Make sure no particles fly into the oil pan.
NOTICE
Property damage from soiling!
Lint and thread remnants can impair the operation of the machine.
Clean the machine as described.
NOTICE
Property damage from solvent-based cleaners!
Solvent-based cleaners will damage paintwork.
Use only solvent-free substances for cleaning.
a brush.
Maintenance
Service Instructions 171/173 - 00.0 - 01/2020
Advertisement
Table of Contents
