Barge In On An Active Call; Leave A Bridge Call; Resume Held Calls - Polycom CX5500 User Manual

Polycom CX5500 Unified Conference Station for Microsoft Skype for Business User Guide
holding the corresponding line key for one second. The call's status and the Barge In soft key displays for
five seconds.
If bridging is disabled and privacy is enabled for the shared line, you cannot barge in on active calls
answered by other MADN members.

Barge In on an Active Call

After a call is answered, any group member can barge in on the active call on a public shared line, which
becomes a bridge call—a call between two or more MADN members and another party. Ask your system
administrator about the maximum number of participants allowed on a bridge call.
To barge in on an active call:
1 Press and hold the corresponding line key for the shared line for one second.
2 Select the Barge In soft key, as shown next, and lift the handset.
A bridge tone plays notifying the other call participants that you are barging in on the call.

Leave a Bridge Call

Any member in a bridge call can leave the call, and the call remains active.
To leave a bridge call:
» Select the End Call soft key, or place the handset in the cradle.
Your connection to the bridge call is ended, and the other call participants remain on the call.
You can rejoin a bridge call after leaving by pressing the Barge In soft key again.

Resume Held Calls

Any MADN member can resume a held call on the shared line. When an active call is placed on hold on the
shared line, all group members are notified of the call's new status by a flashing red LED light on the line
key on all members' phones, if enabled by your system administrator.
Polycom, Inc. 76